Covers, catches, caps and stops

 

Safety catches and stops for AFV Guns

On the Mk. I, I*, II, III, V guns, the safety catch forms part of the rear-crosspiece.

  • Cat No. C2/BG 0210, GUNS, MACHINE, VICKERS, .303-IN., Caps, Safety stop
  • Cat No. C2/BG 0217, GUNS, MACHINE, VICKERS, .5-IN., MK. V, Catches, Safety, Mk. V – To be demanded as “Guns, machine, Vickers, .303-in., Catches, safety, Mk. II”
  • Cat No. C2/BG 0217, GUNS, MACHINE, VICKERS, .303-IN., Catches, Safety, Mk. II – Consisting of plunger, thumb-piece, screw, and Mk. II spring. Also for Guns, machine, Vickers, .5-in., Mk. V
  • Cat No. C2/BG 0313, GUNS, MACHINE, VICKERS, .303-IN., Plungers, Safety catch – Also for Guns, machine, Vickers, .5-in., Mk. V
  • Cat No. C2/BG 0314, GUNS, MACHINE, VICKERS, .303-IN., Plungers, Safety stop
  • Cat No. C2/BG 0313, GUNS, MACHINE, VICKERS, .5-IN., MK. V, Plungers, Safety catch, Mk. II – To be demanded as “Guns, machine, Vickers, .303-in., Plungers, safety catch”
  • Cat No. C2/BG 0328, GUNS, MACHINE, VICKERS, .5-IN., Screws, Safety catch – For Mks. II, IV and V guns. To be demanded under “Guns, machine, Vickers, .303-in.”
  • Cat No. C2/BG 0366, GUNS, MACHINE, VICKERS, .303-IN., Springs, Plungers, Safety stop
  • Cat No. C2/BG 0372, GUNS, MACHINE, VICKERS, .303-IN., Springs, Safety catch, Mk. II – Also for Guns, machine, Vickers, .5-in., Mks. II, IV and V
  • Cat No. C2/BG 0372, GUNS, MACHINE, VICKERS, .5-IN., Springs, Safety catch, Mk. II – For Mks. II, IV and V guns. To be demanded under “Guns, machine, Vickers, .303-in.”
  • Cat No. C2/BG 0394, GUNS, MACHINE, VICKERS, .5-IN., Thumb-pieces, safety catch, Mk. II – For Mks. II, IV and V guns. To be demanded as “Guns, machine, Vickers, .303-in., Thumb-pieces, safety catch”
  • Cat No. C2/BG 0585, GUNS, MACHINE, VICKERS, .5-IN., Caps, Safety stop, Mk. I – With 2 split pins. For Mks. I (N.I.V.) and II guns
  • Cat No. C2/BG 0586, GUNS, MACHINE, VICKERS, .5-IN., Caps, Safety stop, Mk. II – With 2 split pins. For Mks. IV and V guns
  • Cat No. C2/BG 0587, GUNS, MACHINE, VICKERS, .5-IN., Caps, Trip gear, Mk. II – With locking screw. For Mks. IV and V guns
  • Cat No. C2/BG 0591, GUNS, MACHINE, VICKERS, .5-IN., Catches, Safety, Mk. III – Consisting of Mk. I plunger, thumb-piece, screw and spring. For Mks. II and IV guns
  • Cat No. C2/BG 0641, GUNS, MACHINE, VICKERS, .5-IN., Levers, Regulating, trip gear – For Mks. II, IV and V guns
  • Cat No. C2/BG 0727, GUNS, MACHINE, VICKERS, .5-IN., Plungers, Safety catch, Mk. I – For Mks. II and IV guns
  • Cat No. C2/BG 0728, GUNS, MACHINE, VICKERS, .5-IN., Plungers, Safety stop
  • Cat No. C2/BG 0729, GUNS, MACHINE, VICKERS, .5-IN., Plungers, Trip gear – For Mks. II, IV and V guns
  • Cat No. C2/BG 0758, GUNS, MACHINE, VICKERS, .5-IN., Screws, Cap, trip gear – For Mks. II, IV and V guns
  • Cat No. C2/BG 0798, GUNS, MACHINE, VICKERS, .5-IN., Springs, Plunger, Safety stop
  • Cat No. C2/BG 0799, GUNS, MACHINE, VICKERS, .5-IN., Springs, Plunger, Trip gear
  • Cat No. G1/GA 0800, GUNS, MACHINE, VICKERS, .5-IN., Pins, Cap, safety stop – To be demanded as “Pins, keep, split, 1/16-in. x ¾-in.”
  • Cat No. G2/GB 1575, GUNS, MACHINE, VICKERS, .5-IN., Pins, Retaining, spring, trip gear – For Mks. II, IV and V guns. To be demanded as “Steel, tool, rods, bright, No. 45”

Front cover

  • Cat No. C1/BD 0637, List of changes A7792, GUNS, MACHINE, VICKERS, .303-IN., MK. I, Catches, Front Cover, Mk. I – With plunger, spring, plug and split keeper pin
  • Cat No. C1/BD 0651, List of changes A7792, GUNS, MACHINE, VICKERS, .303-IN., MK. I, Covers, Front, Mk. I* – With catch bracket
  • Cat No. C1/BD 0774, GUNS, MACHINE, VICKERS, .5-IN., Nuts, Check, cover joint pin, Mk. II – For Mks. II, IV and V guns. To be demanded under “Guns, machine, Vickers, .303-in., Mk. I”
  • Cat No. C1/BD 0774, List of changes A7792 and B3199, GUNS, MACHINE, VICKERS, .303-IN., Nuts, Check, cover joint pin, Mk. II – Slotted, for Mk. IV pins; also for Guns, machine, Vickers, Mks. IVA, IVB, VI, VI* and VII, and .5-in., Mks. II, IV and V (Section C2) and Brackets, dial sight, M.G., Mk. I
  • Cat No. C1/BD 0820, List of changes A7792, GUNS, MACHINE, VICKERS, .303-IN., Mk. I, Pins, Joint, Cover, Mk. I – Screwed; With Mk. I check nut and keeper pin, for use on guns without dial sight bracket; also for Guns, machine, Vickers, .303-in., Mks. IVA and IVB (Section C2)
  • Cat No. C1/BD 0821, List of changes A7792, GUNS, MACHINE, VICKERS, .303-IN., Mk. I, Pins, Joint, Cover, Mk. IV – Screwed; With Mk. II check nut, and split keeper pin, for use on guns without dial sight bracket; also for Guns, machine, Vickers, .303-in., Mks. IVA, IVB, VI, VI* and VII (Section C2)
  • Cat No. C1/BD 0823, List of changes B3199, GUNS, MACHINE, VICKERS, .303-IN., MK. I, Pins, Joint, Cover, Mk. V – Screwed; With Mk. II check nut and split keep pin, 1/16-in. x ¾-in. (Section G1)(Cat No. GA 0800). For use when Bracket, dial sight, M.G., Mk. I is fitted
  • Cat No. C1/BD 0872, List of changes A7792, GUNS, MACHINE, VICKERS, .303-IN., MK. I, Front cover catch
  • Cat No. C1/BD 0875, List of changes A7792, GUNS, MACHINE, VICKERS, .303-IN., MK. I, Plungers, Front cover catch
  • Cat No. C1/BD 0943, List of changes A7792, GUNS, MACHINE, VICKERS, .303-IN., Mk. I, Springs, Front cover catch, Mk. I
  • Cat No. C1/BD 0973, GUNS, MACHINE, VICKERS, .303-IN., Studs, Spring, Front cover catch – To be demanded as “Guns, machine, Vickers, .303-in., Mk. I, Studs, spring, rear cover lock”
  • Cat No. C2/BG 0184, GUNS, MACHINE, VICKERS, .303-IN., MK. VII, Catches, front cover, Mk. III
  • Cat No. C2/BG 0185, GUNS, MACHINE, VICKERS, .303-IN., MK. VII, Covers, front, Mk. IV – WIth Mk. III catch, with axis pin, spring and spring stud assembled
  • Cat No. C2/BG 0214, GUNS, MACHINE, VICKERS, .303-IN., Catches, Front cover, Mk. II – For Mks. IV A, IV B, VI and VI* guns
  • Cat No. C2/BG 0229. GUNS, MACHINE, VICKERS, .303-IN., Covers, Front, Mk. III – With catch, axis pin, spring and spring stud assembled. For Mks. IV A, IV B, VI and VI* guns
  • Cat No. C2/BG 0293, GUNS, MACHINE, VICKERS, .303-IN., Pins, Axis, Front cover catch – With split pin
  • Cat No. C2/BG 0359, GUNS, MACHINE, VICKERS, .303-IN., Springs, Front cover catch, Mk. II
  • Cat No. C2/BG 0496, GUNS, MACHINE, VICKERS, .5-IN., MK. V, Catches, Front cover, Mk. IV
  • Cat No. C2/BG 0500, GUNS, MACHINE, VICKERS, .5-IN., MK. V, Covers, front, Mk. IV – With extractor stop spring; and Mk. IV catch, with Mk. IV spring, retaining pin and split pin
  • Cat No. C2/BG 0521, GUNS, MACHINE, VICKERS, .5-IN., MK. V, Pins, Joint, front cover, Mk. II – Screwed; with check nut and pin
  • Cat No. C2/BG 0528, GUNS, MACHINE, VICKERS, .5-IN., MK. V, Pins, Retaining, Front cover catch – With split pin
  • Cat No. C2/BG 0551, GUNS, MACHINE, VICKERS, .5-IN., MK. V, Springs, Front cover catch, Mk. IV
  • Cat No. C2/BG 0552, GUNS, MACHINE, VICKERS, .5-IN., MK. V, Springs, Front cover extractor stop
  • Cat No. C2/BG 0590, GUNS, MACHINE, VICKERS, .5-IN., Catches, Front cover, Mk. III – Fors Mks. II and IV guns
  • Cat No. C2/BG 0595, GUNS, MACHINE, VICKERS, .5-IN., Covers, Front, Mk. II – With Mk. III catch with pin; Mk. III spring and spring stud. For Mks. II and IV guns
  • Cat No. C2/BG 0680, GUNS, MACHINE, VICKERS, .5-IN., Pins, Axis, Front cover catch – With split pin. For Mks. II and IV guns
  • Cat No. C2/BG 0688, GUNS, MACHINE, VICKERS, .5-IN., Pins, Joint, Front cover, Mk. I – Screwed; with check nut and split pin. For Mks. I (N.I.V.), II and IV guns
  • Cat No. C2/BG 0786, GUNS, MACHINE, VICKERS, .5-IN., Springs, Front cover catch, Mk. III – For Mks. II and IV guns
  • Cat No. G1/GA 0799, GUNS, MACHINE, VICKERS, .5-IN., Pins, Split, Front cover catch pin – For Mks. II and IV guns. To be demanded as “Pins, keep, split, 1/16-in. x ½-in.”
  • Cat No. G1/GA 0799, List of changes A7792, GUNS, MACHINE, VICKERS, .303-IN., Pins, Split, Front cover catch pin – Also for Slide, tangent sight; also for rear cover catch pins; and for rear cover catch pins and trigger guard catch on Mks. IV A and IV B guns. To be demanded as “Pins, keep, split, 1/16-in. x ½-in.”
  • Cat No. G1/GA 0799, GUNS, MACHINE, VICKERS, .5-IN., MK. V, Pins, Split, Front cover catch retaining pin – To be demanded as “Pins, keep, split, 1/16-in. x ½-in.”
  • Cat No. G1/GA 0800, GUNS, MACHINE, VICKERS, .5-IN., Pins, Split, Nut, joint pins – For front cover and rear cross-piece joint pins. To be demanded as “Pins, keep, split, 1/16-in. x ¾-in.”
  • Cat No. G1/GA 0801, List of changes A9233, GUNS, MACHINE, VICKERS, .303-IN., MK. I, Pins, Split, Check nut, Long – Also for Nuts, check, cover joint pin, Mk. II; and for Guns, machine, VIckers, .303-in., Mks. IVA, IVB, VI, VI* and VII (Section C2). To be demanded as “Pins, keep, split, 1/16-in. x 1-in.”

Rear cover

  • Cat No. C1/BD 0765, List of changes A7792, GUNS, MACHINE, VICKERS, .303-IN., MK. I, Locks, Cover, rear
  • Cat No. C1/BD 0774, List of changes A7792 and B3199, GUNS, MACHINE, VICKERS, .303-IN., Nuts, Check, cover joint pin, Mk. II – Slotted, for Mk. IV pins; also for Guns, machine, Vickers, Mks. IVA, IVB, VI, VI* and VII, and .5-in., Mks. II, IV and V (Section C2) and Brackets, dial sight, M.G., Mk. I
  • Cat No. C1/BD 0810, List of changes A7792, GUNS, MACHINE, VICKERS, .303-IN., MK. I, Pins, Cover, Lock – Screwed
  • Cat No. C1/BD 0952, List of changes A7792, GUNS, MACHINE, VICKERS, .303-IN., MK. I, Springs, , Rear cover lock

P1020610

  • Cat No. C1/BD 0973, List of changes A7792, GUNS, MACHINE, VICKERS, .303-IN., MK. I, Studs, Spring, Rear cover lock – Also for front cover catch spring on Guns, machine, Vickers, .303-in., Mks. IVA, IVB, VI, VI* and VII, and .5-in., Mks. II and IV (Section C2)
  • Cat No. C2/BG 0215, GUNS, MACHINE, VICKERS, .303-IN., Catches, Rear cover, Mk. I – For Mks. IV A and IV B guns
  • Cat No. C2/BG 0216, GUNS, MACHINE, VICKERS, .303-IN., Catches, Rear cover, Mk. III – For Mks. VI, VI* and VII guns
  • Cat No. C2/BG 0248, GUNS, MACHINE, VICKERS, .303-IN., Finger-pieces, rear cover catch – With screw. For Mks. VI, VI* and VII guns
  • Cat No. C2/BG 0265, GUNS, MACHINE, VICKERS, .303-IN., Levers, Catch, Rear cover – For Mks. IV A and IV B guns
  • Cat No. C2/BG 0295, GUNS, MACHINE, VICKERS, .303-IN., Pins, Axis, Lever, rear cover catch – See “Pins, axis, rear cover catch. For Mks. IV A and IV B
  • Cat No. C2/BG 0295, GUNS, MACHINE, VICKERS, .303-IN., Pins, Axis, Rear cover catch – With split pin. Also for “Lever, rear cover catch.” For Mks. IV A and IV B guns
  • Cat No. C2/BG 0301, GUNS, MACHINE, VICKERS, .303-IN., Pins, Hinge, Rear cover – With split pin
  • Cat No. C2/BG 0321, GUNS, MACHINE, VICKERS, .303-IN., Screws, Finger-piece, Rear cover catch – For Mks. VI, VI* and VII guns
  • Cat No. C2/BG 0370, GUNS, MACHINE, VICKERS, .303-IN., Springs, Rear cover catch, Mk. I – For Mks. IV A and IV B guns
  • Cat No. C2/BG 0371, GUNS, MACHINE, VICKERS, .303-IN., Springs, Rear cover catch, Mk. IV – For Mks. VI, VI* and VII guns
  • Cat No. C2/BG 0407, GUNS, MACHINE, VICKERS, .5-IN., MK. II, Catches, Rear cover, Mk. II
  • Cat No. C2/BG 0455, GUNS, MACHINE, VICKERS, .5-IN., MK. IV, Catches, Rear cover, Mk. III
  • Cat No. C2/BG 0497, GUNS, MACHINE, VICKERS, .5-IN., MK. V, Catches, Rear cover, Mk. IV
  • Cat No. C2/BG 0529, GUNS, MACHINE, VICKERS, .5-IN., MK. V, Pins, Rear cover catch
  • Cat No. C2/BG 0554, GUNS, MACHINE, VICKERS, .5-IN., MK. V, Springs, Rear cover catch, Mk. III
  • Cat No. C2/BG 0593, GUNS, MACHINE, VICKERS, .5-IN., Collars, Rear cover hinge pin
  • Cat No. C2/BG 0682, GUNS, MACHINE, VICKERS, .5-IN., Pins, Axis, Rear cover catch – With split pin. For Mks. I (N.I.V.), II and IV guns
  • Cat No. C2/BG 0687, GUNS, MACHINE, VICKERS, .5-IN., Pins, Hinge, rear cover – With collar and split pin
  • Cat No. C2/BG 0726, GUNS, MACHINE, VICKERS, .5-IN., Plungers, Rear cover catch – For Mks. II and IV guns
  • Cat No. C2/BG 0800, List of changes A 9589, GUNS, MACHINE, VICKERs, .5-IN., Springs, Rear cover catch, Mk. II – For Mks. II and IV guns
  • Cat No. G1/GA 0799, GUNS, MACHINE, VICKERS, .303-IN., Pins, Split, Rear cover catch pins – For Mks. IV A and IV B guns. See “Pins, split, front cover catch pin”
  • Cat No. G1/GA 0799, GUNS, MACHINE, VICKERS, .303-IN., Pins, Split, Rear cover hinge pins – See “Pins, split, front cover catch pins”
  • Cat No. G1/GA 0799, GUNS, MACHINE, VICKERS, .5-IN., Pins, Split, Rear cover catch pin – For Mks. I (N.I.V.), II and IV guns. To be demanded as “Pins, keep, split, 1/16-in. x ½-in.”
  • Cat No. G1/GA 0799, GUNS, MACHINE, VICKERS, .5-IN., Pins, Split, Rear cover hinge pins – To be demanded as “Pins, keep, split, 1/16-in. x ½-in.”
  • Cat No. G1/GA 0801, List of changes A9233, GUNS, MACHINE, VICKERS, .303-IN., MK. I, Pins, Split, Check nut, Long – Also for Nuts, check, cover joint pin, Mk. II; and for Guns, machine, VIckers, .303-in., Mks. IVA, IVB, VI, VI* and VII (Section C2). To be demanded as “Pins, keep, split, 1/16-in. x 1-in.”

Shutter

  • Cat No. C1/BD 0639, List of changes A3312, GUNS, MACHINE, VICKERS, .303-IN., MK. I, Catches, Shutter
  • Cat No. C1/BD 0809, List of changes A3312, GUNS, MACHINE, VICKERS, .303-IN., MK. I, Pins, Catch, Shutter
  • Cat No. C1/BD 0876, List of changes A3312, GUNS, MACHINE, VICKERS, .303-IN., MK. I, Plungers, Shutter catch
  • Cat No. C1/BD 0922, List of changes A7242, GUNS, MACHINE, VICKERS, .303-IN., MK. I, Shutters – Complete with catch, plunger, spring and keep pin
  • Cat No. C1/BD 0955, List of changes A7792, GUNS, MACHINE, VICKERS, .303-IN., MK. I, Springs, Shutter catch – Also for No. 2 layshaft lever, Guns, machine, Vickers, .5-in., Mks. II and IV (Section C2)

Slides


Trigger

  • Cat No. C1/BD 0604, List of changes 18580, GUNS, MACHINE, VICKERS, .303-IN., MK. I, Bars, trigger
  • Cat No. C1/BD 0960, GUNS, MACHINE, VICKERS, .303-IN., MK. I, Springs, Trigger bar
  • Cat No. C2/BG 0218, GUNS, MACHINE, VICKERS, .303-IN., Catches, Trigger, Mk. I – For Mks. IV A and IV B guns
  • Cat No. C2/BG 0219, GUNS, MACHINE, VICKERS, .303-IN., Catches, Trigger, Mk. II – For Mks. VI, VI* and VII guns
  • Cat No. C2/BG 0406, GUNS, MACHINE, VICKERS, .5-IN., MK. II, Catches, Finger trigger

Trigger guard

  • Cat No. C2/BG 0220, GUNS, MACHINE, VICKERS, .303-IN., Catches, Trigger guard, Mk. I – With spring and split pin. For Mks. IV A and IV B guns
  • Cat No. C2/BG 0221, GUNS, MACHINE, VICKERS, .303-IN., Catches, Trigger guard, Mk. II – For Mks. VI, VI* and VII guns
  • Cat No. C2/BG 0408, List of Changes A 9589, GUNS, MACHINE, VICKERS, .5-IN., MK. II, Catches, Trigger guard carrier, Mk. I – Also for trigger guard on Mk. IV gun

Chains

  • Cat No. C1/BD 0195, List of changes A 3312, CHAINS, M.G.
  • Cat Nos. C1/BD 0195 and 2027, GUNS, MACHINE, VICKERS, .303-IN, Chains, loading catch – For Mks. VI, VI* and VII guns. With 2 M.G. “S” hooks. Also for Guns, machine, Vickers, .5-in., Mks. IV and V. To be demanded as “Chain, M.G.” (½yd.) and “Hooks, ‘S’, M.G.” (2) (Section C 1) (Cat No. BD 0195 and BD 2027 respectively)
  • Cat No. C1/BD 2027, List of changes A 3312, HOOKS, “S,” M.G.

Sources:

Specific source references can be provided if required.